Description
Four plugs, three individually controllable
Please read before ordering:
Smart devices are activated and associated with your MSPS organization. Smart devices can be linked to any agent dashboard. Typically, members link their devices with an agent at the same location.
Once activated, smart devices are accessible from anywhere in the world using only a browser. No apps are required to control your devices.
Activating your smart device
After ordering, an email will be sent that contains the activation details. Your paypal email address will be used. Follow the instructions in the email to activate the device. The activation process immediately assigns the agent to your organization. At this point, you can associate it to an agent/location or use it independently from the IoT menu.
If you do not receive your activation email (check your spam/junk box too), please contact us for help.
Non refundable
Devices are put through extensive tests when being prepared and configured for shipping. As we are reselling various manufacturers, these devices are NON REFUNDABLE and cannot be returned as it is not possible to resell used devices that may have been improperly used, reset or abused. That said, if you have problems, please contact us and we will do everything possible to help you.
Connection
Our devices require local WiFi to function. The local WiFi must provide a DHCP IP. Our preparation process includes putting the device in Access Point (AP) mode.
When powered it up for the first time, a mobile phone or tablet is used to connect it to the local WiFi. Once connected to the local WiFi, the device will immediately begin communicating with MSPS and will become ready to activate.
An email with the needed details will have been sent for each device purchased explaining the simple activation process. To reach it locally, find the DHCP IP assigned to it from the WiFi router and open a browser to that IP.
To reach it remotely, once activated, its controls will be found on app.mspsensors.com under the IoT menu and the agent dashboard if assigned to an agent.
This device is wireless only
At this time, all of our hardware is wireless only. This may change as we find new hardware to support. To use our hardware, the site must have a basic wireless AP to connect the smart device to so that it can communicate with the MSPS network. If using one of our hardware agents, the agent itself can act as an AP if it will not be used to monitor wireless services and wired to the network via Ethernet.
Availability
We use various off-the-shelf devices that run our custom firmware. The device you receive may or may not look like or be exactly as pictured. If this is important to you, contact us before purchasing to see what we have on hand.
Support
While we do not build the hardware, we extensively test them as best we can, trying to support devices that will run for many years to come.
Security
These devices are NOT meant to be used directly on the Internet as they are not security hardened. They are meant to be installed inside of the local (LAN) network to act as just another client on your network.
These devices do not advertise themselves once configured with the local WiFi. This means that it should be practically impossible for drive-by hackers to find the device or hack into it unlike many insecure devices sold today.
Privacy
Our smart hardware cannot and does not sniff packets meaning that it is not possible for these devices to monitor your activities in any way.
